Author Topic: Plotting the ERROR NORM  (Read 1157 times)

Robin Dufour

  • Posts: 36
    • View Profile
Plotting the ERROR NORM
« on: November 12, 2012, 04:08:29 pm »
Hi think it would be very useful to see where the convergence ERROR is spatially.  Based on some discussion I understood this would come in a new version but sooner is better. It seems that sometime an entire model cannot converge just because of very few elements so mapping them is Key.

Cheers,
Robin
Robin Marc Dufour M.Sc.
Project Hydrogeologist, Numerical Modeler
MWH PERU S.A.
Av. Conquistadores 626-638 Lima 27 Perú
t. +51 1 700 3200
f. +51 1 700-3700 
 robin.dufour@mwhglobal.com

Peter Schätzl

  • Posts: 977
    • View Profile
Re: Plotting the ERROR NORM
« Reply #1 on: December 17, 2013, 08:52:55 am »
This feature will be available for transient simulations in FEFLOW 6.2 (predictor-corrector error).
Berlin - Germany

Jarrah

  • Posts: 34
    • View Profile
Re: Plotting the ERROR NORM
« Reply #2 on: November 28, 2017, 12:05:38 am »
Is this plot available?

It still seems that sometime an entire model cannot converge just because of very few elements so mapping them is Key.
All models are wrong. Some are useful.

Björn Kaiser

  • Posts: 435
    • View Profile
Re: Plotting the ERROR NORM
« Reply #3 on: November 30, 2017, 07:07:39 pm »
Yes, the plot is available. In the Data panel, please right-click on User Data and choose Add Predefined Distribution from the context menu. FEFLOW will allow you to plot the nodal error for each problem class.