Poll

What is the best way to discharge a pump out of system from a coupled model , mike urban and flexible mesh ?????

What is the best way to discharge a pump out of system from a coupled model , mike urban and flexible mesh ?????
0 (0%)
Is anyone has this problem before????!!!!!!!
0 (0%)

Total Members Voted: 0

Author Topic: What is the best way to discharge a pump out of system from a coupled model ??  (Read 177 times)

Moein13711992

  • Posts: 7
    • View Profile
We have run into a complexing problem with our coupled model. We are coupling  MIKE URBAN (MIKE 1D) with M21 (m21fm) in MIKE FLOOD. Our goal is to lower water surface elevations in the watershed. We have a storm water pump station at the downstream end to help empty the collection system and lower the surface water even further. We find that the pump makes things worse in the watershed (deeper) rather than better (lower).
We have tried discharging out of the system by leaving the To Node for the pump blank and by discharging to a large storage tank away from the surface. Neither seem to help. The bigger the pump the worse the condition. It is exactly opposite of what we would expect. Anyone run into this situation before?

Moein13711992

  • Posts: 7
    • View Profile
Thanks everyone we got it.