Author Topic: PreProcessing Error in MIKE SHE  (Read 171 times)

Dcaracciolo

  • Posts: 4
    • View Profile
PreProcessing Error in MIKE SHE
« on: May 11, 2020, 03:10:10 pm »
Hi guys. Last week I started to use Mike SHE. I set all the parameters, the dfs0 (time series of Precipitation and ETP), dfs2 (DEM, land use and soil grids), shapefiles (domain, catchment) and the river simulation file .mhydro (that I prepared in Myke HYDRO and it ran correctly). I launched the preprocessing, but in a few seconds the simulation was interrupted and in the white window below appeared 'Abnormal termination'. I read the .log file:

'MIKE SHE version: 2020
 Name of input file : C:\Users\IdroUser\Desktop\Massari\Riu_Massari_Allai.she
 Loading Simulation Specifications...
 Abnormal termination'

I tried to search in the manual about the error but I have not found any feedback. I think it is an initial error (before reading the dfs2 files)... I tried to change the path of the project and to reduce the length of the name of the .she file. I reduced the grid resolution from 50m to 200m (for DEM, land use, and soil grids) to reduce the number of cells from 919x836 to 230x209, but the model is yet unable to process the data.
I checked the .log file of the Karup River example, and I noticed that after 'Loading Simulation Specifications ...' the model should check the 'extra parameters' and it should initialize the .fif files, while the process, in my case, stops sooner.

Thanks for your help,
Domenico

Dcaracciolo

  • Posts: 4
    • View Profile
Re: PreProcessing Error in MIKE SHE
« Reply #1 on: May 12, 2020, 02:30:22 pm »
I found the error.
Tnx!
Domenico

icatjorge

  • Posts: 1
    • View Profile
Re: PreProcessing Error in MIKE SHE
« Reply #2 on: July 02, 2020, 04:16:44 am »
Hi everyone,

i have problems in Mike-she. i have this message "ERROR: Could not get DFS0 file time series item. File name: C\AltoSanJorge\....."

Anybody know to fix this problem.

Thanks a lot.